Intermatic® EK4027S Stock
printPrint
  1. pin-int

Intermatic® EK4027S

Intermatic® EK4027S EK4000 Series, 347 VAC, 1000 W Tungsten, 2 A Ballast, Fixed Mounting, Polycarbonate

  • MPN: EK4027S
  • UPC: 078275152366
  • Min. Order Qty: 1
  • Quantity Interval: 1
  • loading loading
Intermatic® EK4027S

NightFox™ Electronic Photocontrols permanently install on outdoor electrical boxes, in-wall boxes or outdoor lighting fixtures. Ideal for LED fixtures with long life expectations. Mounts internally to an enclosure with a 3/8 in diameter window for light sensing. Comes with 9 in wire leads.

Intermatic®, EK4027S, Button, Series: EK4000 Series, LED Fixture, 347 VAC, 5000 A, 50/60 Hz Frequency, 1000 W Tungsten, 2 A Ballast, 2 to 5 s Timing, 18 AWG Wire, Solid State Photo/Silicon IR Filtered Sensor, 1.5 FC Turn ON/4.5 FC Turn OFF Sensitivity, Environmental Conditions: -40 to 158 deg F, 10000 hr Operating Cycles, Fixed Mounting, Polycarbonate, Gray, 1-5/16 in W x 1-1/4 in D x 2-1/4 in H Dimensions

Amperage Rating      :      5000 A
Color      :      Gray
Dimensions      :      1-5/16 in W x 1-1/4 in D x 2-1/4 in H
Environmental Conditions      :      -40 to 158 deg F
Fixture Type      :      LED
Frequency Rating      :      50/60 Hz
Operating Cycles      :      10000 hr
Sensitivity      :      1.5 FC Turn ON/4.5 FC Turn OFF
Sensor Type      :      Solid State Photo/Silicon IR Filtered
Series      :      EK4000 Series
Timing Range      :      2 to 5 s
Type      :      Button
Wire Size      :      18 AWG
Voltage Rating      :      347 VAC
Tungsten Rating      :      1000 W
Ballast Load      :      2 A
Mounting Type      :      Fixed
Material      :      Polycarbonate
  • Non-drift silicon light sensor with IR filter
  • DC relay with zero-crossing circuitry for extended life
  • Conformal coated PCB
  • Exceeds 10,000 ON/OFF switching cycles
  • Fail ON mode
  • Ideal for single or multi fixture HID and LED installations
  • 220J MOV surge protection element
  • Mounts internally to enclosure
  • Features 3/8 in - 18 NPSM thread for a minimum installation hole size of 5/8 in diameter