Crouse-Hinds EDS3130 Non Stock
printPrint
  1. pin-int

Crouse-Hinds EDS3130

EDS3130 1-Gang 3-Way Dead End Factory Sealed Snap Switch Control Station With Snap Switch, FlexStation™, 1 in Hub, 120/277 VAC, 20 A, NEMA 3/7B/7C/7D/9E/9F/9G NEMA Rating

  • MPN: EDS3130
  • UPC: 782274764016
  • Min. Order Qty: 1
  • Quantity Interval: 1
  • loading loading
Crouse-Hinds EDS3130

Crouse-Hinds FlexStation™ Snap Switch Control Station, 1-Gang 3-Way Dead End Factory Sealed, Series: EDS, 120/277 VAC, 20 A, 3 Pole, Front Operator, Handle Actuator, Thread Connection, NEMA 3/7B/7C/7D/9E/9F/9G NEMA Rating, Surface Mounting, Feraloy® Iron Alloy, Aluminum Acrylic Painted/Electro-Galvanized, 5-7/8 in L x 3-1/2 in W x 3-1/16 in H Dimensions

Actuator      :      Handle
Connection Type      :      Thread
Dimensions      :      5-7/8 in L x 3-1/2 in W x 3-1/16 in H
Finish      :      Aluminum Acrylic Painted/Electro-Galvanized
Material      :      Feraloy® Iron Alloy
Mounting Type      :      Surface
Number of Poles      :      3
Operator Type      :      Front
Series      :      EDS
Type      :      1-Gang 3-Way Dead End Factory Sealed
Voltage Rating      :      120/277 VAC
Amperage Rating      :      20 A
NEMA Rating      :      NEMA 3/7B/7C/7D/9E/9F/9G
  • Reduce installation problem
  • Eliminate external seals
  • Lower installation cost
  • Improve safety
  • Are used with general purpose snap and pushbutton type switches
  • Standard neoprene covers for front operated pushbuttons prevents accumulation of dirt and entrance of water around operating shafts
  • Mounting lugs and taper tapped hubs with integral bushing
  • Large machine screws for fastening covers to bodies
  • Lockout provisions on front operated pushbutton (marked "STOP" and "OFF") and selector switch covers
  • Lockout hole for padlock having 1/4 in hasp is provided when used with covers for front lever and side rocker type operation
  • Close tolerances in machining of wide, mating flanges and journaled shafts and bearings for front button operation, produces flame tightness of enclosure joints
  • On enclosures with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flame tightness
  • Dust ignitionproof, raintight
  • To prevent arcing of enclosed device from causing ignition of a hazardous atmosphere external to the enclosure
  • In conjunction with magnetic starters or contactors for remote control of motors
  • For manual starting of small AC/DC motors
  • To provide manual starting and stopping and motor running protection (with heater)
  • 1 in hub